SPXO11V Anti-Vibration Phase-Lock OCXO

MODEL: SPXO11V-10M-100M
Low Vibration Phase Noise (-150dBc/Hz@1kHz)
Integrated low noise OCXO & PLL

Download

Send Inquiry

MODEL: SPXO11V-10M-100M

FEATURES

Low Vibration Phase Noise (-150dBc/Hz@1kHz)

Integrated low noise OCXO & PLL

ELECTRONIC PARAMETERS

Parameters		Conditions	Min.	Typ	Max.	Units
Nominal Frequency		－	100.000			MHz
Supply voltage		－	11.4	12	12.6	V
Package size		－	45×45×20			mm
Power consumption		During warm up	－	－	4.8	Watts
Power consumption		Steady state @ 25℃	－	－	2.4	Watts
Freq. stability vs. load		Without REF, RL±5％	－	－	±2	ppb
Freq. stability vs. supply voltage		Without REF, VDD±5％	－	－	±2	ppb
Initial tolerance		Without REF	－	－	±0.5	ppm
Lock indication level		@ locked	3.0	－	－	V
Aging	per day	After 30 days of continues operation Without REF	－	－	±5	ppb
Aging	per 1st year	After 30 days of continues operation Without REF	－	－	±0.3	ppm
Operating temperature range		－	-40	－	70	℃
Storage temperature range			-55	－	85	℃
Output wave		－	SINWAVE			－
Output power		VDD=12V	8	10	12	dBm
Output load		－	－	50	－	Ω
Harmonics		－	－	－	-30	dBc
Spurious		－	－	－	-70	dBc
Phase noise		Steady state	Dynamic state
	@ 1kHz offset	-160	-145		dBc/Hz
	@ 10kHz offset	-165	-160		dBc/Hz
	@ 100kHz offset	-170	-165		dBc/Hz

Requirement on REF

Parameters	Conditions	Min.	Typ	Max.	Units
Nominal Frequency	－	10.000			MHz
Initial tolerance	－	－	－	±0.5	ppm
Signal power	50Ωload	0	－	10	dBm
Phase noise	@ 10Hz	－	－	-120	dBc/Hz

PACKAGE

PIN DESCRIPTION

REF: REF Signal Input

ALM: Lock Indication

G: Ground Case

+V: Supply Voltage

OUT: RF Output

Notes: Consult factory about other frequencies or special requirement.

Hot Tags: SPXO11v anti-vibration phase-lock OCXO, China, suppliers, factory, customized, Ultra-thin Rubidium Oscillator, Time Frequency Module, High reliability OCXO, Time Sync. Host, Ultra-low short-term stability OCXO, Time Synchronization Host

Previous: No Information

Next: SPXO11 Phase-Lock OCXO